ECOR PRO DryFan 50 Pint Compressor-less, Bucket-less, Stainless Steel Desiccant Commercial Dehumidifier

Protect your larger boat or yacht investment from the inside with the ECOR PRO EPD50-PRO stainless steel desiccant dehumidifier. Protecting the cabin from the harmful effects of moisture but also allows for a longer duct length. With its 1.57-inch length advantage than the EPD30-PRO, the EPD50-PRO is ideal for larger vessels. Its Turbo Fan feature creates better air filtration, resulting to a healthier environment. Well-circulated and refreshed air is more efficient and therefore saves cost on serious structural problems.

-120Vac supply 60 Hz that can be run off a 12V DC-110V AC converters, auto power reset in case of power supply interruption.

-Smallest, commercial-grade desiccant dehumidifier, moisture removal capacity equivalent to 50 pints refrigerant unit, using 3-hole system technology – one air inlet and two air outlets.

-Operating range from -4°F up 104°F maximum room temperature for continuous drying applications, built-in humidistat container, and an optional remote humidistat can be added by way of using a simple plug-in low voltage jack plug that will turn the dehumidifier on an off automatically and remotely if the dehumidifier is concealed or ducted in position.

-Very quiet fan operation at 52dB ideal for small to medium-sized spaces, with 85 CFM air volume capacity (73 CFM – exhaust / 12 CFM regen air flow).

-Compact, stainless steel inside and outside designed for longevity, flat carrying handle that can be extended to allow easy transport and mobility, and anti-scratch four plastic feet that can be swivelled out to make four anchor points so that the unit can be mounted with suitable screws to walls/ceilings or simply fastened down onto a surface. IP24 rating which means the unit can still operate even in damper conditions.

-Reticulated and easy-to-clean dust filter in metal frame to prevent particulates from entering the unit and impeding performance. Auto reset function in case of power supply interruption, perfect in locations where there is a dirty power supply that can affect other electronically controlled products.

-Duct AIR-IN option is fitted with a metal duct flange on the filter grill to allow for an external 5-inch duct to draw in the air from a more remote point, concentrate the dampest air into the unit to be dried if needed. An additional flange can be added to the AIR-OUT but is not provided with the unit.

-Exhaust duct made easy for permanent installation by plumber or a home DIY person using standard waste pipe 1.5-inch diameter fittings.

-Easy repair and maintenance, fast access to replace cord sets and worn-out parts.